|
Rigging Hardware Inspection: Inspection of Eye Bolts, Swivel Hoist Rings, Shackles and Star Point Lifter, per OSHA General Duty Clause and ASME B18.15 standard.
- Physical characteristics, such as size, type and serial number if available of hardware are recorded on an inspection report.
- Hardware is visually inspected for elongation, wear, deformation, and missing capacity markings.
- Bails and hooks of hardware are inspected for cracks that can not be seen by the naked eye using a Magnetic Particle test or a Liquid Penetrant test.
- Each passable piece of hardware will be tagged with a color coded inspection tag, demonstrating that it has been checked.
- Hardware which does not pass inspection will be tagged with a caution tag as well as a red paint mark.
- Lastly, a computer generated report will be provided on a spreadsheet with a certificate to governing regulatory standards for all passing inspections.
Safety Standards:
OSHA General Duty Clause Section 5 (Duties)
Interpretation of ASME B18.15 Standard
|
